Description
Radio Frequency Signal Generator
A portable radio frequency signal generator designed to operate in three frequency bands: 1.2, 2.4, and 5.8 GHz. The device allows you to generate signals at specified frequencies individually in each band or simultaneously in all three.
Applications
The generator can be used for:
- testing the sensitivity of radio frequency signal detectors;
- calibrating equipment;
- demonstrating equipment operation;
- testing detector response at various frequencies;
- training operators to use the equipment.
The generator is designed for testing equipment under controlled conditions.
General Specifications
| Battery | Li-ion, 3000 mAh |
| Maximum consumption | 16 W |
| Charging Parameters | 5.2 В / 2 А DC |
| Time to fully charge | about 1 hour |
| Standalone operation with all three bands activated simultaneously | 25 minutes |
| Degree of protection | IP43 |
| Operating temperature | from +5 to +30 °C |
| Antenna Connector Type | SMA |
| Charging port | USB Type-C |
Range Table
| Parameter | 1.2 GHz | 2.4 GHz | 5.8 GHz |
| Generation Capacity | 0.97–1.15 W | 22.2–31.6 mW | 251–340 mW |
| Consumption | 5 W | 2.03 W | 8.31 W |
| Autonomy | up to 1 year | up to 2 year | up to 30 minutes |
| Frequencies, MHz | 1120, 1160, 1200, 1240, 1280, 1320 | 2370, 2390, 2490, 2510 | 5865 |
Dimensions
- Height with antennas: 345 mm
- Height without antennas: 145 mm
- Width: 40 mm
- Length: 56 mm
- Weight without antennas: 228 g
- Weight with antennas: 285 g
Package Contents: radio frequency signal generator, 1.2 GHz antenna, 2.4 GHz antenna, 5.8 GHz antenna, user manual.
Recommendations for Use
When all three bands are operating simultaneously, it is not recommended to use the generator continuously for more than 20 minutes.
Do not use the device in direct sunlight or at temperatures exceeding the specified operating range. After prolonged use, allow the device to cool down before turning all three bands back on.
The generator is intended for testing equipment under controlled conditions. During operation, comply with applicable laws regarding the use of radio frequency…
The generator is designed for testing equipment under controlled conditions. When operating the device, comply with applicable laws regarding the use of the radio frequency spectrum.
*** Radio frequency measurements were conducted using the following equipment TinySA and Rohde & Schwarz NRP-Z11.
Reviews
There are no reviews yet.